Melbourne, FL – Screen Repair & Rescreening
Screen Repair & Rescreening in Melbourne, FL — Fixed Fast, Done Right
A torn panel, a bent frame section, or storm damage doesn’t always mean a full replacement. We repair and rescreen pool cages, patio enclosures, screen rooms, and lanai enclosures for Melbourne and Brevard County homeowners — often faster and at a fraction of the cost of rebuilding. Free estimates, no trip fee. Call 321-300-5220.
Licensed & Insured Florida Contractor
Fast Installation & Screen Repair Service
Locally Owned & Operated in Melbourne Florida
Satisfaction Guaranteed on All Work
Most screen enclosure problems in Melbourne don’t require a full replacement — they require the right repair done before the damage spreads. A torn screen panel left through one storm season becomes two. A loose anchor left unaddressed becomes a structural failure. Rust staining caught early is a surface treatment; rust left alone is a frame replacement. At Sunny Screen & Patio, we handle the full range of screen repair and rescreening work for Melbourne and Brevard County homeowners — from patching a single panel to rescreening an entire pool cage from top to bottom. Our team has 30-plus years of experience, and every repair is backed by a satisfaction guarantee and a written warranty.
Signs Your Screen Enclosure Needs Repair or Rescreening
Florida’s coastal environment is harder on screen enclosures than most homeowners realize. Salt air, UV exposure, and storm season wear on frames, screen mesh, anchors, and spline year after year. Catching these signs early keeps a manageable repair from turning into a full replacement.
Torn, Holes, or Sagging Screen Panels
A small tear is an entry point for insects and debris — and it grows with every rain event and wind load. Sagging panels put stress on the surrounding spline channel and frame. Repair or replace panels early before neighboring sections are affected.
Rust Staining or Corrosion on the Fram
Surface rust on aluminum framing near Melbourne's coast is the first sign that corrosion is working into the joints. Treated early, it stays a surface issue. Left alone, it moves into welds and anchor points — turning a cleaning job into a structural repair.
Bent or Bowed Frame Members
Wind loading from tropical storms and hurricanes bends mid-span frame sections over time. A bowed section puts uneven stress on screen panels and surrounding framing — and it doesn't straighten itself out after the storm passes.
Pulled or Missing Spline
Spline holds screen panels in their retainer channel. When spline pulls out — from UV degradation, storm pressure, or simple age — the screen panel loses its tension and the opening is exposed. This is one of the most common repairs we make in Brevard County.
Loose or Failed Base Anchors
Base anchors set into aging concrete work loose over time, especially after repeated storm loading cycles. Loose anchors are a structural concern — and in Brevard County, a permit issue if the enclosure was originally built to code and the anchors are now compromised.
Screen That's Brittle, Chalky, or Discolored
Fiberglass screen exposed to years of Florida UV becomes brittle, tears at the slightest contact, and stops doing its job. If your screen crumbles when touched or has a chalky, faded appearance throughout, a full rescreening is the right call — not patch repairs.
Our Screen Repair & Rescreening Services
We handle repairs at every scale — from a single torn panel on a patio enclosure to structural frame repairs on a large pool cage. For pool enclosures, our pool cage repair service addresses bent frames, failed anchors, broken spline channels, and storm damage to individual bays without requiring a full rebuild. When the frame is sound but the screening has failed throughout, pool cage rescreening replaces all the mesh panels across the entire structure in a single visit. For enclosures with a mix of structural issues and deteriorated screen, pool enclosure repair and pool enclosure rescreening handle both in one project.
Patio enclosures, screen rooms, and lanai enclosures get the same level of attention. Torn panels, pulled spline, rusted fasteners, and bent frame sections on any screened structure are all within our scope. We stock both standard fiberglass and no-see-um mesh — the right call for waterfront properties near Indian Harbour Beach, the Intracoastal, and low-lying areas throughout Brevard County where smaller insects are a consistent issue. Screen replacement on a patio enclosure or lanai is often a single-day job. We carry materials on the truck so most standard rescreening work doesn’t require a parts delay before we can start.
All repair and rescreening work connects back to our broader screen enclosures and screen enclosure installation services. If a repair reveals that a section of your enclosure is beyond saving and needs to be rebuilt, we handle that as part of the same project — no handoff to another contractor mid-job.
Screen Repair & Rescreening for Melbourne and Brevard County Homes
Screen enclosure repairs in Melbourne require materials and methods built for coastal conditions. Replacement hardware, fasteners, and frame components need to be rated for salt air exposure — installing standard-grade materials in a coastal repair just restarts the corrosion clock from day one. We use coastal-grade aluminum and stainless hardware throughout our repair work, and we treat all new fastener points during installation to slow corrosion at the joints where it typically originates.
Storm season timing matters for repair decisions in Brevard County. An enclosure with loose anchors, bowed frame sections, or deteriorated screen going into hurricane season is a liability — both structurally and for your homeowner’s insurance coverage. Repairs completed before storm season keep your enclosure performing and your coverage intact. We work with homeowners across Melbourne, Viera, Rockledge, and West Melbourne — including HOA communities where repairs visible from the street may require a quick architectural review before work begins. We’re familiar with that process and can help you get through it without delays.
We serve Melbourne, West Melbourne, Palm Bay, Rockledge, Viera, Satellite Beach, Indian Harbour Beach, Indialantic, Eau Gallie, and the surrounding Brevard County area. Free estimate, no trip fee — call us to get on the schedule.
What to Expect When You Call
We keep the process simple. No runaround, no pressure, no surprise charges after the fact. Here’s what happens from your first call to project completion.
Free on-site estimate. We come to your property — no trip fee — inspect the enclosure, identify every issue that needs attention, and give you a written price. You’ll know exactly what the repair or rescreening costs before we schedule anything.
Scope confirmation. We’ll walk you through what we found, what needs to be repaired versus replaced, and what screen type makes sense for your property. No upselling — if a patch repair is the right call, that’s what we recommend.
Materials and scheduling. We stock the most common screen mesh, spline, and frame components. Most standard repair and rescreening jobs don’t require a parts order before we can start. We’ll confirm the timeline at the estimate visit.
Repair or rescreening. Our crew handles the full job. Single-panel repairs and rescreening on smaller enclosures are often completed in a single day. Larger rescreening jobs and structural repairs may take two days depending on scope.
Final walkthrough. We walk the finished work with you before we leave. If anything needs adjustment, we handle it on the spot. Our satisfaction guarantee and warranty are in effect from the day the job is complete.
Why Melbourne Homeowners Call Us First
Sunny Screen & Patio is a locally owned, family-operated contractor serving Melbourne and Brevard County. We hold a Florida Contractor’s License, carry full insurance, and back every repair and rescreening project with a satisfaction guarantee and a written warranty. Read what our 92 five-star reviewers say before you decide
5-Star Rated on Google
Our customers rate us 5.0 stars with over 90 reviews on Google. We've earned that reputation one job at a time—showing up when we say we will, keeping our prices honest, and leaving your screen enclosure looking brand new.
Fast Turnaround Times
When a storm tears through your pool cage, you don't want to wait weeks for a repair. We serve Melbourne and the Space Coast, so our crews are already close by. Most screen repairs and rescreens are scheduled within days, not months.
Free On-site Estimates
We never charge just to take a look. We'll come to your home, inspect your screen enclosure or pool cage, and give you a clear price before any work begins. No pressure. No hidden fees. No surprises on your invoice
Built Right the First Time
We stand behind every install and repair. If something isn't right, we come back and make it right at no extra charge. Quality materials, clean work, and a crew that treats your home like their own. That's the standard on every job.
Learn more about everything we offer at our Melbourne patio enclosure supplier
Pool Enclosure Services
All Our Repair & Rescreening Services
Every repair and rescreening service for Melbourne screen enclosures — under one contractor.
Pool Cage Repair
Bent frames, failed anchors, broken spline channels, and storm damage — without a full rebuild.
Pool Cage Rescreening
Replace all screen panels throughout your pool cage in a single visit.
Pool Enclosure Repair
Structural repairs for pool enclosures with cracked welds, shifting sections, or storm damage.
Pool Enclosure Rescreening
Full screen replacement across your pool enclosure matched to your existing frame system.
Screen Enclosures
New screen enclosure installation for pools, patios, screen rooms, and lanais.
Ready to Get Your Screen Enclosure Fixed?
Don’t let a torn panel or storm damage sit through another season. Call us today for a free on-site estimate — no trip fee, no obligation. We serve Melbourne, Viera, Eau Gallie, Indian Harbour Beach, Palm Bay, and all of Brevard County.