Melbourne, FL – Screen Enclosures
Screen Enclosures in Melbourne, FL — Built for Florida's Toughest Conditions
There’s nothing better than a screened outdoor living space. No bugs. No harsh afternoon sun. No debris blowing into your yard. Melbourne’s coastal weather is tough on screen enclosures — salt air, UV exposure, and storm winds take a toll over time. We build screen enclosures that hold up against Florida’s toughest conditions. From full installations to replacing worn panels, our team handles every part of the job. Free estimates, no trip fee. Call 321-300-5220.
Licensed & Insured Florida Contractor
Fast Installation & Screen Repair Service
Locally Owned & Operated in Melbourne Florida
Satisfaction Guaranteed on All Work
A screen enclosure is one of the best investments a Melbourne homeowner can make. It turns an open pool deck, patio, or lanai into a protected outdoor living space you can use every day — morning coffee, evening dinners, weekend afternoons — without fighting insects, UV exposure, or the debris that Florida weather blows in constantly. At Sunny Screen & Patio, we design, fabricate, and install screen enclosures for Melbourne and Brevard County homeowners who want quality work that holds up in a coastal environment. Our team has 30-plus years of hands-on screen enclosure experience, and we back every project with a satisfaction guarantee and a written warranty. Whether you need a new installation or your existing enclosure needs attention, we handle the full scope of the job.
Signs You Need Screen Enclosure Work
Melbourne’s coastal environment accelerates wear on screen enclosures faster than most homeowners expect. Salt air, storm season, and year-round UV exposure work on frames and screen mesh from the day they’re installed. Catching problems early saves money — and keeps your enclosure doing its job through every season.
Torn or Sagging Screen Panels
Small tears in screen panels grow quickly. A pinhole becomes an entry point for insects and debris within one rain season — and a sagging panel puts stress on the spline channel and frame around it.
Rust Stains or Pitting on the Frame
Surface rust on aluminum framing near Melbourne's coast is an early warning sign. Left untreated, corrosion works into the frame joints and anchor points — turning a minor repair into a structural one.
Bent or Bowed Frame Sections
Wind loading from tropical storms bends mid-span frame sections over time. A bowed section loses structural integrity and puts uneven stress on surrounding panels — address it before the next storm season compounds the damage.
Screen That's Brittle or Discolored
Fiberglass screen exposed to years of Florida UV becomes brittle and tears at the slightest contact. Discoloration and a chalky texture are signs the mesh has degraded and is well past its service life.
Loose or Failed Anchors
Base anchors set into aging concrete can work loose over time — especially after repeated storm loading. Loose anchors are a structural and safety concern that needs to be addressed before hurricane season
Gaps at Corners, Roofline, or Door Frames
Gaps where screen meets frame let insects in and signal that spline, retainer channel, or door hardware is failing. A small gap now becomes a larger problem after the next heavy storm.
Our Screen Enclosure Services
We handle the full range of screen enclosure work for Melbourne and Brevard County homeowners. New installations start with a site visit and a conversation about your space — pool enclosures, patio enclosures, screen rooms, and lanai enclosures are all built to your specific footprint and permitted through Brevard County. We fabricate custom aluminum frame sections and cut screen panels in-house — no stock sizes when custom is the right call. Every new enclosure is designed and built to current Florida Building Code wind load requirements.
Existing enclosures that have taken storm damage or general wear don’t always need a full rebuild. Our screen repair and rescreening services cover the full scope — from patching individual torn panels and replacing failed spline to repairing bent frame sections, resetting loose anchors, and rescreening an entire structure from top to bottom. We stock both standard fiberglass and no-see-um mesh, which is the right choice for waterfront properties near Indian Harbour Beach, the Intracoastal, and any low-lying areas in Brevard County where smaller insects are a consistent problem.
All of our screen enclosure work is managed through our screen enclosure installation services — one contractor who handles design, fabrication, permitting, installation, and long-term repairs. If your project involves multiple structures or a combination of a new enclosure and repair work on an existing one, we handle it as a single project. One call, one crew, one warranty.
Screen Enclosures for Melbourne and Brevard County Homes
Building a screen enclosure in Melbourne requires a different approach than most of the country. Salt air from the Atlantic coast accelerates corrosion on aluminum framing — particularly at base anchors and fastener points where moisture collects and sits. We use aluminum extrusions and hardware rated for coastal exposure, and we apply corrosion-resistant treatment at all connection points during installation. The difference shows up a few seasons in, when frames built for coastal conditions are still performing cleanly and frames that weren’t are already showing rust staining and joint failure.
Storm season is a year-round consideration in Brevard County. Every screen enclosure we build is permitted and engineered to Florida Building Code wind load requirements — which matters for structural integrity and for your homeowner’s insurance coverage in the event of storm damage. An unpermitted structure that fails in a named storm creates coverage complications that a properly permitted build avoids entirely. For homeowners in HOA communities across Viera, Rockledge, and West Melbourne, we know the architectural review process and can provide the drawings and documentation your association requires before work begins.
We serve Melbourne, West Melbourne, Palm Bay, Rockledge, Viera, Satellite Beach, Indian Harbour Beach, Indialantic, Eau Gallie, and the surrounding Brevard County area. Free estimate, no trip fee — call us to schedule a visit.
What to Expect When You Call
We keep the process simple. No runaround, no pressure, no surprise charges after the fact. Here’s what happens from your first call to project completion.
Free on-site estimate. We come to your property — no trip fee — assess the space or existing structure, take measurements, and give you a written price. You’ll know exactly what the job costs before we schedule anything.
Design and material selection. For new installations, we walk through frame options, screen types, and layout. For repairs, we identify exactly what needs to be done and confirm materials. HOA requirements are confirmed upfront for applicable properties.
Permitting. New screen enclosure installations require a Brevard County building permit. We handle the application, drawings, and all county follow-up. We’ll give you a realistic permit timeline at the estimate stage.
- Fabrication and installation. We fabricate all custom frame and screen components in-house. Our crew handles the full installation — rescreening jobs are typically completed in a single day, new enclosures in two to four days depending on size.
- Final walkthrough. We walk the finished job with you before we leave. If anything needs adjustment, we handle it on the spot. Our satisfaction guarantee and warranty are in effect from the day the job is complete
Why Melbourne Homeowners Call Us First
Sunny Screen & Patio is a locally owned, family-operated contractor serving Melbourne and Brevard County. We hold a Florida Contractor’s License, carry full insurance, and back every screen enclosure project with a satisfaction guarantee and a written warranty. Read what our 92 five-star reviewers say before you decide.
5-Star Rated on Google
Our customers rate us 5.0 stars with over 90 reviews on Google. We've earned that reputation one job at a time—showing up when we say we will, keeping our prices honest, and leaving your screen enclosure looking brand new.
Fast Turnaround Times
When a storm tears through your pool cage, you don't want to wait weeks for a repair. We serve Melbourne and the Space Coast, so our crews are already close by. Most screen repairs and rescreens are scheduled within days, not months.
Free On-site Estimates
We never charge just to take a look. We'll come to your home, inspect your screen enclosure or pool cage, and give you a clear price before any work begins. No pressure. No hidden fees. No surprises on your invoice
Built Right the First Time
We stand behind every install and repair. If something isn't right, we come back and make it right at no extra charge. Quality materials, clean work, and a crew that treats your home like their own. That's the standard on every job.
Learn more about everything we offer at our Melbourne patio enclosure supplier
Pool Enclosure Services
All Our Screen Enclosure Services
From new builds to repairs — every screen enclosure service under one contractor.
Pool Enclosures
Pool enclosure installation, repair, and rescreening — built for Melbourne’s coastal conditions
Patio Enclosures
Custom patio enclosures, screen rooms, and lanai enclosures for year-round outdoor living.
Screen Rooms
Fully enclosed outdoor rooms built on existing slabs or new pads — insects out, breeze in.
Lanai Enclosures
Enclose your covered lanai and make it comfortable and usable across every season.
Screen Repair & Rescreening
Torn panels, bent frames, failed anchors, and full rescreening — all handled by our Melbourne crew.
Ready to Get Your Screen Enclosure Done Right?
Don’t let a failing enclosure or an unscreened outdoor space go another season without attention. Call us today for a free on-site estimate — no trip fee, no obligation. We serve Melbourne, Viera, Eau Gallie, Indian Harbour Beach, Palm Bay, and all of Brevard County.